Becker Cascade User Manual

63
Radio mode
• Reception optimisation
Accesses the selection menu for
reception optimisation. See “Recep-
tion optimisation” on page 70.
•
Adaptive bandwidth controč
You can switch bandwidth control on/
off. See “Bandwidth control” on
page 71.
Selecting a waveband
! In the Radio main menu, select Wave-
band
.
! Turn the rotary control/push button
to select one of the following options:
FM - ačphabeticaččy,
FM - by quačity,
Station memory,
AM or
Short wave
! Confirm your selection by pressing
the rotary control/push button .
The selected waveband is set.
•
FM - ačphabeticaččy
If an FM station was selected previ-
ously, it will remain selected or, if an
AM station was selected, the last FM
station selected will be set.
The Fast Access menu appears. All
receivable stations which are not fil-
tered out, appear in the list in alpha-
betical order.
The waveband set is indicated by the
symbol in the status display.
•
FM - by quačity
If an FM station was selected previ-
ously, it will remain selected or, if an
AM station was selected, the last FM
station selected will be set.
The Fast Access menu appears. All
receivable stations which are not fil-
tered out, appear in the list in order of
quality.
The waveband set is indicated by the
symbol in the status display.
•
Station memory
The last station set is retained.
The station memory, which can store
up to 20 FM and AM waveband sta-
tions, is displayed.
The waveband set is indicated by the
symbol in the status display.
See “Station memory” on page 75.
•
AM
The last medium wave station selected
is set.
The status display appears.
The waveband set is indicated by the
symbol in the status display.
•
Short wave
The last short wave station selected is
set.
The status display appears.
The waveband set is indicated by the
symbol in the status display.
3002

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN