Becker Cascade User Manual

45
Navigation mode
! Select the desired category.
! Confirm your selection by pressing
the rotary control/ push button .
The available points of interest for the
previously selected category are dis-
played.
! Turn the rotary control/push button
and then press the rotary control/
push button to select the required POI.
Route guidance to the selected point of
interest is initiated.
During route guidance
During route guidance, navigation infor-
mation is displayed on the status screen
in all operating modes.
However, complete navigation informa-
tion is only displayed in the navigation
status screen.
Examples:
The navigation status screen.
The radio status screen with active navi-
gation. The display for other sources is
similar. When you are approaching a
turn, the navigation status screen appears
automatically. Once you have completed
the turn, the unit reverts to the previous
status screen.
Navigation status screen
All information relevant to information
is displayed on the navigation status
screen.
The distance to the next turn and the esti-
mated time of arrival are shown on the
right-hand side of the display.
The name of the road the vehicle is turn-
ing into appears in the first line on the
upper left of the display. The name of
the road the vehicle is currently travel-
ling along appears in the second line.
Depending on the setting, the current
time, estimated journey time remaining
or distance remaining to be travelled
appear on the bottom left of the display.
2106
2057
1004
2057

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN