Becker Cascade - Commands for the Stopover Menu

172
Voice mode
• Switch avoid motorway on/off.
Switch on:
! Say the command Avoid motor-
way.
Alternative commands:
Avoid motorway on or Activate avoid
motorway.
Switch off:
! Say the command Avoid motor-
way off or Deactivate avoid motor-
way.
• Switch avoid tunnel on/off.
Switch on:
! Say the command Avoid tunnel.
Alternative commands:
Avoid tunnel on or Activate avoid
tunnel.
Switch off:
! Say the command Avoid tunnel off
or Deactivate avoid tunnel.
• Switch avoid toll on/off.
Switch on:
! Say the command Avoid toll or
Avoid toll on.
Switch off:
! Say the command Avoid toll off or
Deactivate avoid toll.
• Switch avoid ferries on/off.
Switch on:
! Say the command Avoid ferry [on]
or [Activate] avoid ferry.
Switch off:
! Say the command Avoid ferry off
or Deactivate avoid ferry.
• Set route options
! Say the command Ready.
Commands for the Stopover
menu
In the Stopover menu, the following
commands are available (page 50):
• Enter full address as stopover.
! Say the command Enter address
or Address.
• Select a stopover from the address
book.
! Say the command From address
book or [Select] [destination] from
address book.
2039