91
Media mode
CD changer mode
The following points, described in “CD
mode” on page 85 apply to CD changer
mode:
• “Notes on compact discs (CD)” on
page 85.
• “Notes on CD-R and CD-RWs” on
page 86.
Operational readiness of
CD changer
If a CD changer is connected to the Cas-
cade, it will be ready for operation as soon
as the CD magazine, loaded with CDs, is
inserted. Close the sliding cover after
loading. All further operation is per-
formed from the Cascade control panel.
Loading/Ejecting the
CD magazine
To eject the CD magazine, open the slid-
ing cover on the changer and press the
eject button. The magazine is ejected
and can be removed.
When inserting CDs into the magazine,
please note the instructions printed on
the magazine.
External units/AUX mode
You can call up units connected exter-
nally to the Cascade as described in
“Media fast access functions” on
page 79.
However, AUX mode must be activated
as described in “External device” on
page 138.
The external unit cannot be operated.
You can only make volume and noise
settings for this source.
Attention:
Incorrectly inserted CDs will not be
played.
Note:
To allow for the fastest possible change
of CDs, the magazine should be loaded
successively, beginning with compart-
ment 1.
To Next Page
Loading...
Need help?
General
