111
Address book
The last letter entered is highlighted. To
help, the name closest to the previous
entry is displayed. The Cascade offers
only the possible remaining letters for
selection. If no other entries are available,
the Cascade completes the name auto-
matically.
Accept entry:
! In the data entry menu, select the
symbol.
or
! Press the rotary control/push button
and hold it down for at least 2 seconds.
If the complete name/location has already
been entered and/or added automatically,
the address book entry appears.
If an incomplete name/location entry was
confirmed, the selection list appears.
! Turn the rotary control/push button
and then press the rotary control/
push button to select the required
name/location.
The address book entry selected appears.
Setting the search criterion
! In the Address Book main menu,
select the
Search criterion entry.
! Select Search by name or Search by town
(on = ).
Note:
Select the symbol to delete the last
character in the entry.
6012
Note:
If more than one address entry has been
saved for one location, another selection
menu appears.
! Select the required address book entry.
6013
Note:
Only one of the two settings may be
active ( ) at the same time.
6014
To Next Page
Loading...
Need help?
General
