138
Settings
External device
You can specify whether an AUX source
or an external hands-free unit is
connected to the Cascade instead of a
CD changer.
! Select Externač device in the system
settings.
! Select between CD changer, Aux and
Externač hands-free off (on = ).
Reset function
You can reset the Cascade to the factory
settings.
! Select Reset functions in the system set-
tings.
! You may now select Dečivery status,
Reset settings or Dečete personač data.
•
Dečivery status
The Cascade is reset to the factory set-
tings. All settings are reset. Personal
data is deleted.
•
Reset settings
All settings made are reset to original
values. Personal data is not deleted.
•
Dečete personač data
Personal data is deleted. Settings are
not reset.
! In the following prompt, select Yes to
reset the settings or
No to continue
without a reset.
A reset is performed if
Yes is selected.
The Cascade switches itself off briefly
and then back on again automatically.
Note:
Only one of the three settings can be
active ( ) at one time.
However, all three functions may be
inactive ( ) at the same time.
If the Cascade recognises that a CD
changer is connected,
CD changer is
activated ( ). It is then not possible to
switch the function off manually.
The microphone of the Cascade cannot
be used for external hands-free
operation.
7021
7024
To Next Page
Loading...
