150
Voice mode
Help function (online help)
The online help provides information
about voice commands currently sup-
ported. Please note that the online help
will only tell you about the voice com-
mands supported for the current mode.
If you have added a new command or
pressed a button, a different set of com-
mands will be available for selection.
You can find out about these by calling
up the help function again.
! Press the rotary control/push button
.
A border will appear around the current
display and a signal tone # will sound
(if activated).
! ! Say the command Help or Operat-
ing instructions.
The Cascade reads out the commands
that are supported for this function. The
possible commands also appear on the
display in text format.
Aborting voice dialogue
You can abort a voice dialogue at any
time.
! ! Say the command Cancel or End.
or
! Press the rotary control/push button
.
Navigation in lists
If a list containing a number of pages
appears on the display, you can navigate
this list by using voice commands.
Scroll forward one page
! ! Say the command Scroll forwards.
Alternative commands:
Next page or Forwards.
Scroll back one page
! ! Say the command Scroll back-
wards or Previous page.
Jump to top of list
! ! Say the command Top of list.
Alternative commands:
Display top of list or Display start of
list.
Select a list entry
! ! Say the command Accept [line]
number ... (1 - 4) or [Select] [line]
number ... (1 - 4).
Activate selected list entry
! ! Say the command Accept, Ok or
Add.
Having the list entries read out
(Only for navigation selection lists
e.g. selecting town or road)
! ! Speak the command Read out.
Alternative commands:
Read out [all] entries, Read out list or
Read out everything.
Calling up the status display
You can switch to the status display for
the currently active source from all
menus.
! ! Say the command Status.
Alternative commands:
Switch over or Main screen.
To Next Page
Loading...
Need help?
General
