Becker Cascade User Manual

123
Settings
Connecting and disconnecting
devices
Before a Bluetoothdevice is able to
communicate with the Cascade, it must
be connected to the system.
You can initiate this connection from the
Cascade or from the external device.
Connecting devices (Cascade)
! Select the device to be connected from
the device list.
Press the rotary control/push button .
! Select Yes to connect or No not to
connect.
If
Yes is selected, the Cascade will
attempt to establish a connection to the
required device.
You may be required to enter a password
depending on which device you are
trying to connect.
Note:
It is not yet clear whether connection is
possible in both directions with all
devices using Bluetooth® wireless
technology. In the event that the
connection cannot be established from
the Cascade, try initiating the
connection from the external device,
and vice versa.
Notes:
• A device that has not yet been
connected is identified by the symbol
or . A device which is already
connected is identified by the
symbol.
• If no devices have yet been stored in
the device list
No BT devices will be
displayed. You can then start a search
for Bluetooth devices as described in
“Searching for Bluetooth devices”
auf Seite 127.
7036
Note:
You will find further information on
this in the instructions for the device
which you are trying to connect.
For some devices a fixed password has
been specified by the manufacturer.
Enter this password. With other devices
you can choose a number code with 1 -
16 digits. This code must be entered in
the Cascade and the device to be
connected.
7037

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN