92
Telephone mode
Telephone mode
Below, you will find information on
operating a mobile phone with
Bluetooth® wireless technology,
connected to the Cascade.
Notes:
• The Cascade can operate a mobile
phone equipped with Bluetooth®
wireless technology. We support the
Bluetooth® wireless technology
profile HFP1.0. Mobile phones
without Bluetooth® wireless
technology cannot be operated.
• It is possible that some of the func-
tions described are not available with
some mobile phones equipped with
Bluetooth® wireless technology.
The Internet page www.becker.de
contain additional informations.
• If your mobile telephone is connected
to the Cascade and the Cascade is
switched off (ignition is still switched
on or the ignition key is in the radio
position), the Cascade is activated by
an incoming call.
Notes:
• The call lists and fast access entries
described below always only apply to
the time during which the mobile
phone, equipped with Bluetooth®
wireless technology, was connected
to the Cascade. The entries in the call
lists of the Cascade are not
synchronised with the call lists on the
mobile phone.
• The Cascade cannot access the
mobile phone’s number memory or
the SIM card. However you can
import address book entries from the
mobile phone, as described in
“Importing an address book entry” on
page 115.
• It is only possible to display the name
of a caller if the caller is listed in the
address book on the Cascade.
Warning
Risk of injury
Please ensure that you keep the mobile
phone in an appropriate, safe holder.
Only then can injuries be prevented in
the event of an accident or due to
sudden braking.
GG