Becker Cascade - Local

40
Navigation mode
• In vicinity of čocation
You can select a POI in the vicinity of
the vehicle. When you make your
selection, the unit will tell you in
which direction the POI is located and
how far away it is.
•
In country
You can select a POI for the selected
country from a range of national POI
categories.
•
In vicinity of destination
You can select a POI in the vicinity of
the destination.
•
In pčace
You can select a POI in a specific
town.
Local
! In the POI menu, select the In vicinity of
čocation
entry.
! Confirm your selection by pressing
the rotary control/push button .
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required POI cate-
gory.
The data entry menu for POIs appears
or, if fewer than 10 POIs are available in
the selected category, the unit switches
directly to the POI list.
! Turn the rotary control/push button
and then press the rotary control/push
button to select each letter one after the
other.
Accept entry:
! In the data entry menu, select the
symbol.
or
! Press the rotary control/push button
and hold it down for at least 2 seconds.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required POI.
Route guidance to the selected point of
interest is initiated.
Note:
The
In vicinity of destination entry can only
be selected if route guidance is active.
Old
version
2042
2043
2044