Becker Cascade - Selecting a Number from the Address Book

96
Telephone mode
If the person called answers the
telephone the Cascade switches to the
status display for active telephone calls.
Selecting a number from the
address book
Use this function to select a telephone
number from an address book and to call
this number.
! In the Telephone main menu, select
the entry
Cačč from address book.
The address book entries which have a
telephone number are displayed.
! Turn the rotary control/push button
and then press the rotary control/
push button to select the desired entry.
If several telephone numbers have been
saved in the address book entry the
following appears on the display.
! Turn the rotary control/push button
and then press the rotary control/
push button to select the desired
number.
The connection will be established.
Note:
If the number called is busy, the busy
tone sounds. Some mobile phones are
so quick to terminate the connection at
the busy tone that you will not hear it.
The menu from which the call was
started is then displayed again
immediately.
Note:
If there are more than 9 entries in the
address book, for which one or more
telephone numbers are stored, the data
entry menu for locating the required
name appears.
5008
Note:
Up to three telephone numbers are
displayed and marked with different
symbols:
stands for the mobile number.
stands for the business number.
stands for the private number.
5009