Becker Cascade User Manual

121
Settings
• Bluetooth is switched on and a
telephone is connected to the Cascade.
! Press the rotary control/push button
.
The Bluetooth device list is displayed.
The devices recognised by the Cascade
are displayed in this list. The current
status is indicated by means of a symbol
next to the name of the devices.
• Connected device (marked with the
symbol)
• Device with Standard status (marked
with the symbol)
• Coupled devices (marked with the
symbol)
• The symbol is shown on the
display if an error occurred in
establishing a connection. It is then
only possible to disconnect the device.
Always allow connection
When this function is activated the
corresponding external device can
establish a connection to the Cascade
without you authorising it.
! In the device list, select the device for
which the “Always allow connection”
setting is to be changed.
! Press the rotary control/push button
and hold until the following menu
appears.
! Select the Ačways aččow connection entry.
! Press the rotary control/push button
to switch the function on ( ) or
off ( ).
7030
7031
Notes:
• The device which was stored in the
device list last will be shown at the
end of the list.
• Devices stored in the list are retained
until the entry is deleted.
• If no devices have yet been stored in
the device list,
No BT devices will be
displayed. You can then start a search
for Bluetooth devices in “Searching
for Bluetooth devices” auf Seite 127.
7032

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN