Becker Cascade - Disconnecting Devices; Calling up Bluetooth Settings

126
Settings
• Ačways
Connection to the external device is
allowed. The function described in
“Always allow connection” auf
Seite 121 will also be activated.
Further connection requests will be
accepted without a query.
If the connection to the external device
is established successfully, another
signal tone can be heard and the
following message appears.
! Press the rotary control/push button
.
A connection has now been established
to the external device.
Disconnecting devices
! Select the device to be disconnected
from the device list.
! Press the rotary control/push button
.
! Select Yes to disconnect or No not to
disconnect.
If
Yes is selected, the Cascade will
disconnect the required device.
Calling up Bluetooth settings
! Press .
! Turn the rotary control/push button
anti-clockwise until
Bčuetooth
appears at the top right of the display.
! Press the rotary control/push button
.
The Bluetooth device list is displayed.
! Select the Bčuetooth menu entry.
7040
Note:
A connected device is identified by the
symbol.
7031
7043
7030
7031