Becker Cascade User Manual

139
Settings
Data backup
You can use this function to backup the
address book data and the fast access
functions for navigation, telephone and
address book and load previously saved
data back onto your Cascade.
! Select Data backup in the system set-
tings.
! Turn the rotary control/push button
to select one of the following op-
tions:
Secure data or
Load data
.
! Confirm your selection by pressing
the rotary control/ push button .
Backing up data
! In the Data Backup menu, select Se-
cure data
.
! Turn the rotary control/push button
to select the memory card for the
backup.
! Confirm your selection by pressing
the rotary control/ push button .
This starts the data backup.
The following display appears when the
backup has been successful:
Data has
been backed up.
.
! Press the rotary control/ push button
.
Loading data
! In the Data Backup menu, select Load
data
.
7055
Notes:
• Only the address book data and the
fast access functions for navigation,
telephone and address book are saved.
• Voice entries and Bluetooth device
lists are not saved.
• The saved data cannot be read or edited
on, for example, your home computer.
7056
Note:
When loading data from a memory
card, the data currently stored on the
Cascade is completely overwritten by
the data stored on the memory card.
Voice entries created after the backup
may also be lost during this process.
You cannot reverse this process.
7058

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN