55
Navigation mode
The route is calculated with the new
route options.
Information during non-active
route guidance
Displaying/Storing a position
You can display and store the current
position. See “Displaying/Storing posi-
tion” on page 53.
Displaying TMC messages
You can display TMC messages as de-
scribed in “Displaying traffic announce-
ments” on page 54. Of course, no traffic
announcements are displayed for the
route.
Dynamic route guidance
with TMC
What is dynamic route
guidance?
Dynamic route guidance is used to cal-
culate the route, taking current traffic
announcements into account.
The traffic announcements are transmit-
ted by a TMC radio station in addition to
the radio programme and are received
and analysed by the navigation system.
The reception of traffic announcements
is free of charge.
Note:
Only one of the three settings (
Dynamic
route, Quick route
, Short route) may be
active ( ) at the same time.
For more information about route
options, see “Setting the route options”
on page 33.
Note:
Dynamic route guidance is not possible
in all countries.
When new route calculations are made
with active dynamic route guidance, the
navigation system may request the
memory card containing the navigation
data (if it is not already inserted).
Note:
As the traffic announcements are trans-
mitted by radio stations, we cannot
assume responsibility for the complete-
ness or accuracy of the announcements.
Austria: The location and event code
was made available by ASFINAG and
BMVIT.
To Next Page
Loading...
