128
Settings
! Press the rotary control/push button
to cancel the search.
If you do not cancel the search it will
continue to run.
If other devices are found, further
messages will be displayed concerning
those devices.
The devices found are displayed in a list
after the search has been completed.
You can then connect/ disconnect the
devices as described in “Connecting and
disconnecting devices” auf Seite 123.
Making devices visible to others
Here you can specify whether other
Bluetooth devices are to be able to
recognise the Cascade or not.
! Call up the Bluetooth settings.
! Select the Device visibče for others entry.
! Press the rotary control/push button
to switch recognisability on ( )
or off ( ).
Device name
You can give your Cascade a name. This
name will be displayed by other
Bluetooth devices.
! Call up the Bluetooth settings.
! Select the Device name entry.
! Enter the desired name. For this
purpose, proceed as described in
“Data entry menus” auf Seite 12.
The changed name will be displayed in
brackets in the Bluetooth settings next to
the device name entry.
7047
7048 7049
7050