99
Telephone mode
Following initiation of the emergency
call, the following information is
displayed in the status bar.
After the emergency call has been made,
you can end the call as described in
“Ending a call” on page 101.
Settings
In the settings section you can activate/
deactivate the “Automatic call
answering” and “Dialogue with call”
functions.
! In the Telephone main menu, select
Setting.
! Turn the rotary control/push
button to select between
Auto. cačč answering and
Diačogue for caččs.
! Turn the rotary control/push button
to switch the required function on
() or off ().
Automatic call answering
When the function ( ) is active,
incoming calls will automatically be
answered after approx. 5 seconds.
You therefore do not have to answer the
call.
Dialogue with call
If the function ( ) is active, a voice
mode dialogue will automatically be
activated to answer an incoming call.
Note:
A query as to whether you wish to start
an emergency call will be shown, even
if you dial the emergency services
number “112” directly.
5015
5016
Note:
When the function ( ) is active, the
settings under Dialogue with call will
be ignored.
Note:
The “Automatic call answering”
function ( ) must be switched off so
that the dialogue can start when the ( )
function has been activated.
To Next Page
Loading...
Need help?
General
