Becker Cascade User Manual

132
Settings
Deleting:
! Select Dečete radio or Dečete address
book
.
! When the next prompt appears, select
Yes to delete the entry or No not to
delete.
Entries will be deleted or retained on the
basis of the selection.
Voice output
You can configure voice outputs for the
Cascade here.
! Select Voice output in the voice mode
settings.
! You may now select the Signač prior to
voice input
, Confirm voice input and Detaičed
voice output
functions.
•
Signač prior to voice input
Once the function has been activated,
in addition to being highlighted on the
Cascade, a beep tone sounds to
indicate that the unit is ready for a
voice command.
•
Confirm voice input
If the function is active, the voice
command is repeated by the Cascade
for confirmation. However, please
note that the voice command repeated
may not tally exactly with the voice
command you entered, but with the
main command. It may be the case, for
example, that you say “end” and the
Cascade repeats “cancel”. In voice
mode, these two commands have the
same meaning.
•
Detaičed voice output
If the function is active, in some places
you will receive detailed instructions
(e.g. for entering a destination in voice
mode).
! Turn the rotary control/push button
to switch the required function on ( )
or off ( ).
Extended PTT
If the function is active, voice mode can
be activated automatically by pressing
, , , or
and you can input a voice command
directly.
! Select PTT extended in the voice mode
settings.
! Turn the rotary control/push button
to switch the function on ( ) or off
().
7011
Note:
The abbreviation PTT stands for “Push
To Talk”.
7012

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN