16
General operation
Switching the unit on/off
Switching on
! Press .
or
! If the Cascade was switched off via
the ignition, the Cascade will switch
back on once the ignition has been
switched on.
! Confirm the warning which appears
by pressing the rotary control/push
button .
Switching off
! Press .
If the ignition is switched on, the Cas-
cade is switched to standby mode. The
display goes dark and the Cascade sound
is switched off.
or
! Switch off the vehicle ignition.
The shutdown display appears for
approx. 5 seconds.
During this period of approx. 5 seconds,
shutdown can be aborted by pressing
one of the buttons on the Cascade or by
switching the ignition back on.
The Cascade then switches itself back on
and plays back the last source selected
(radio or media).
1010
Notes:
• Unless the warning message is con-
firmed, the Cascade will remain disa-
bled.
• Once it has been switched on, the
Cascade will play back the last source
selected (radio or media). Any mute
or pause function activated will be
cancelled.
• If fewer than approx. 2 hours have
elapsed since the unit was last
switched off, active route guidance
will be restarted.
• If the volume was set to a very loud
value before the unit was last switched
off, it will be reset to setting 26 when
the unit is switched back on.
1010
To Next Page
Loading...
Need help?
General
