Becker Cascade User Manual

53
Navigation mode
Information during route
guidance
Displaying destination
information
! Press .
! Turn the rotary control/push button
clockwise until
Destination appears
on the top right of the display.
The following information appears:
• On the top left, the destination town
and destination road.
• To the left underneath the destination
town, the average speed thus far.
• Above the image of the car, the
distance still to be travelled and the
anticipated time of arrival.
• To the left and right of the image of
the car, the distance already travelled
and the journey time thus far.
Displaying/Storing position
! Press .
! Turn the rotary control/push button
clockwise until
Position appears on the
top right of the display.
The following information appears:
• If possible, the town and road/geo-
graphical coordinates and height above
sea level (only in the event of sufficient
satellite reception) appear on the left-
hand side of the display.
• The number of satellites which have
been/can be received appears above
the image of the car.
2076
Notes:
• If a stopover is active, information
about it is displayed. appears on
the display above the car.
• Press the rotary control/push button
to reset the values for the average
speed, distance travelled and journey
time thus far to zero.
• By pressing the button for a
long time you can obtain a display of
all the information concerning the
destination shown.
• Exit the destination information by
pressing the button.
2077

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN