131
Settings
! For the Rečative to audio setting, select
Vočume.
! Turn the rotary control/push button
to select the required volume.
Automatic dialogue
You can specify which events should
trigger automatic voice dialogue. Auto-
matic dialogues are automatic queries
from the Cascade after particular events,
for example whether a voice entry is to
be created after a radio station has been
stored.
! Select Automatic diačogues in the voice
mode settings.
! Next, select the required event.
! Turn the rotary control/push button
to switch the required function on ( )
or off ( ).
Voice entries
You can use this function to read out and
delete all voice entries already stored for
the radio and address book functions.
! Select Voice entries in the voice mode
settings.
Reading out:
! Select Read out radio or Read out add.
book
.
The selected voice entries are read out.
Note:
If you have previously selected Rečative
to audio
, you can set the volume in the
range between -10 and +10. In this case,
a negative value means that announce-
ments will be made more quietly than
the selected volume for the audio
source.
7008
7009
Note:
The number of voice entries already
assigned appears on the right-hand side
of the display.
7010
To Next Page
Loading...
