Becker Cascade - Telephone Voice Commands

173
Voice mode
• Select a stopover as destination.
! Say the command Enter special
destination or Special destination.
• Select a stopover from the fast access
list.
! Say the command Rapid access or
[Select] [destination] via rapid
access.
Prompt: Is the new destination a main
destination or a stopover?
• Set as main destination.
! Say the command Main destina-
tion or Enter main destination.
• Set as stopover.
! Say the command Stop-over or
Enter stop-over.
Commands for telephone mode
Commands for telephone fast
access mode
In telephone fast access mode, the
following commands are available:
• Calling up the Telephone main menu
(page 94).
! Speak the command Telephone
menu or Open telephone [menu].
• Calling up the input menu for a
telephone number (page 95).
! Speak the command Dial number
or Enter [telephone] number.
2096
5001