48
Navigation mode
Turn right and then turn right at the sec-
ond exit.
The road divides, keep left.
Options menu
During route guidance, you can call up
the Options menu in the navigation status
screen.
! Press the rotary control/push button
.
The Options menu appears on the right-
hand side.
! Turn the rotary control/push button
to select one of the following options:
Canceč,
Messages,
Route čist,
Stop-over (stopover),
Bčock,
Route opt. or
Announce
! Confirm your selection by pressing
the rotary control/push button .
•
Canceč
You can abort the current route guid-
ance. See “Cancelling route guidance”
on page 49.
•
Messages
You can display/listen to a list of
traffic announcements relevant to the
route. See “Traffic announcements”
on page 49.
•
Route čist
You can display the route planned by
the Cascade. See “Route list” on
page 50.
•
Stop-over
You can enter another destination as a
stopover during active navigation. See
“Stopover” on page 50.
•
Bčock
You can block a section of the route
still to be travelled. See “Blocking a
route” on page 51.
2108
2109
2068
To Next Page
Loading...
