Becker Cascade User Manual

124
Settings
! Enter the password by rotating/
pressing the rotary control/push
button .
! Select the symbol from the
input menu.
or
! press the rotary control/push button
and hold for at least 2 seconds.
A connection will be established to the
required device. The device has now
been now authenticated.
If it was not possible to establish a
connection, the Cascade will notify you
of this on the display.
Connecting a device (external device)
Connecting the Cascade to an external
device can also be initiated by the
external device.
Two different scenarios will be
described below.
• The external device has previously
been connected to the Cascade.
• The external device has not been
connected to the Cascade before.
The external device has previously
been connected to the Cascade
When the external device attempts to
establish a connection, a signal tone can
be heard and the following message
appears.
! Select between Yes, No and Ačways.
•
Yes
Connection to the external device is
allowed.
•
No
Connection to the external device is
rejected.
Note:
If a different device was already
connected, this will be disconnected.
7038
Note:
If a device is already connected to
the Cascade, the attempt made by an
external device to establish another
hands-free connection will be ignored.
Note:
If the function described in “Always
allow connection” auf Seite 121 is
activated, a short signal tone can be
heard and a message appears which
confirms that the external device has
been connected.
7039

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN