Becker Cascade User Manual

44
Navigation mode
The Options menu appears.
! Select the Stop-over entry.
! Confirm your selection by pressing
the rotary control/ push button .
! Select the Point of Interest (externač) en-
try.
! Confirm your selection by pressing
the rotary control/ push button .
The POI menu appears.
! Turn the rotary control/push button
to select one of the following op-
tions:
In vicinity of čocation or
In vicinity of destination
.
! Confirm your selection by pressing
the rotary control/ push button .
•
In vicinity of čocation
You can select a POI in the vicinity of
the vehicle. When you make your se-
lection, the unit will tell you in which
direction the POI is located and how
far away it is.
• In vicinity of destination
You can select a POI in the vicinity of
the destination. This provides no infor-
mation on the direction and distance.
Described below is how to opeate it via
the
In vicinity of čocation menu item.
The categories that can be selected are
then displayed.
2038
2103
2104
Note:
The In vicinity of destination entry can only
be selected if route guidance is active.
Notes:
• The categories and points of interest
shown in the illustrations are exam-
ples. The actual display is dependent
upon the storage medium containing
POIs that is used.
• If the set system language is identical
to one of the languages available on
the storage medium, the categories
are displayed in this language. If there
is no correspondence, the categories
are displayed in all available lan-
guages. This can be recognised from a
country code in front of the category.
• You can display information on POIs
as described in “Information about
points of interest” on page 43.
2105

Becker Cascade Specifications

General

Model	Cascade
Category	Car Stereo System
Bluetooth	Yes
CD Player	Yes
Radio	Yes
MP3 Playback	Yes
Type	Single DIN