Benelli TRK 502 Service Station Manual

2 - 9
TECHNICAL DATA
FRAME SPECIFICATIONS
FRAME
Frame type
STAND AR D
120 mm
6-spoke aluminium alloy
Steering head angle
Trail
Wheel type
Wheel travel
STAND ARD
FRONT WHEEL
Measure
STAND AR D
FRONT TYRE
Tyre type
120/70 ZR17 M/C (58W)
tubeless
Tyre pressure (when the tyre is being cooled)
Model (manufacturer)
17 M/C x MT3.50 DOT-D
aluminium
Rim
Measure
Material
122 mm
Wheel type
Wheel travel
Measure
STAND AR D
REAR TYRE
160/60 ZR 17 M/C ( 73 W)
tubeless
Tyre pressure (when the tyre is being cooled)
Model (manufacturer)
STANDARD
REAR WHEEL
17 M/C x MT4.50 Dot -D
aluminium
Rim
Measure
Material
N.D.
N.D.
6-spoke aluminium alloy
N.D.
2.4 Bar.
N.D.
2.4 Bar.
Modular trellis frame with the front module in stainless
steel and the rear module in die-cast aluminium
REAR TYRE
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder