Benelli TRK 502 Service Station Manual

2 - 10
TECHNICAL DATA
FRAME SPECIFICATIONS
STANDA RD LIM I T
FRONT BRAKE
Brake type
use right handActivation
d
ual-disc brake
semi-floating
Recommended fluid
DOT4
16 mm (0.62 in)Inner diameter of pump cylinder
Inner diameter of caliper cylinder
34 e 30 mm (1.33 e 1.18 in)
320 x 4 mm (12.5 x 0.15 in)
4.0 mm (0.15 in)
Brake discs
Diameter × thickness
Minimum thickness
0.1 mm (0.004 in)
Maximum deformation
4 mm (0.15 in)
Thickness of
worn brake pads
STANDA RD LIM I T
F
Brake type
A
F
DOT4
12 mm (0.47 in)Inner diameter of pump cylinder
Inner diameter of caliper cylinder
32 mm (1.25 in)
260 x 5 mm
4.5 mm (0.17 in)
STANDA RD LIM I T
REAR BRAKE
use right footActivation
single-disc brake
Recommended fluid
DOT4
Brake discs
Diameter × thickness
Minimum thickness
0.15 mm (0.006 in)
Maximum deformation
4 mm
Thickness of
worn brake pads
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder