Benelli TRK 502 Service Station Manual

5 - 68
GEAR BOX
Pos. Description Qty. SQ. SYMBOLS
INTERVENTION
DESCRIPTION
REMARKS
19 WASHER
20 HAIRSPRING
21 SPRING
22 PIN
23 GEAR SELECTION FORK 5TH/6TH
24 GEAR SELECTION FORK 5TH/6TH
25 GEAR SELECTION FORK 1ST/4TH - 2ND/3RD
26 NUT (M18)
27 WASHER
28 PINION
29 OIL SEAL
30
BROACHED BUSHING
31 O-RING
32 BEARING
33 BEARING RETAINER
34 COMPLETE MAIN SHAFT
35 BEARING
36 ELASTIC RING
37 SCRAPING
38 ELASTIC RING
39 NOTCHED WASHER
40 NOTCHED WASHER
41 NOTCHED WASHER
42 NOTCHED WASHER
43 NOTCHED WASHER
44 GASKET
45 WASHER
46 SCRAPING
47 COMPLETE SECONDARY SHAFT
48 SLOTTED NUT (M20)
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder