Benelli TRK 502 Service Station Manual

2 - 15
STANDARD
FUSES (AMPERAGE x QTY)
Fuse CD1 (control unit)
15 A (Blue)
STANDARD
THROTTLE VALVE SENSOR
Resistance
Model (manufacturer)
TGKEYAIR
STANDARD
FUEL PUMP
Max. amperage
Model
Level sensor
Min. Max. resistance
90-95 Ω (empty) - (full) 0-18Ω
STANDARD
AIRBOX AIR TEMPERATURE SENSOR
STANDARD
SAFETY SWITCHES
Neutral switch
Stand switch
QJ
N.D
Resistance
Model (manufacturer)
Tilt
QJ 250T-3(QJ)
Service fuse
Headlamp fuse
Radiator fan fuse
Backup fuse
Fuel pump fuse
2 KOhm ± 20%
STANDARD
THROTTLE BODY AIR PRESSURE SENSOR
Model (manufacturer)/Power supply voltage
15 A (Blue)
40 A (Red)
15 A (Blue)
15 A (Blue) + 40 A (Red)
15 A (Blue)
N.D
N.D.
240600695(DELPHI) /5V
12160244 (PACKARD)
181±8 Ohm 100°C
external
TECHNICAL DATA
ELECTRICAL SPECIFICATIONS
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder