Benelli TRK 502 Service Station Manual

2 - 14
License
plate
light
Instrument board light
LED x 1
High beam light
STANDAR D
LIGHTS (VOLTAGE WATT x QTY)
Neutral indicator light
LED x 1
LED x 1
Faulty engine warning light
LED x 1
Indicator light
Oil level alarm light
LED x 1
LED x 1
TECHNICAL DATA
ELECTRICAL SPECIFICATIONS
ELECTRIC IGNITION SYSTEM
Model (manufacturer)
STANDARD
STANDARD
HORN
Power output
0.7 kw
Model (manufacturer)
Horn type
low
Performance
105 ~ 118 db (A)
Maximum amperage
3 A
STANDARD
FLASHER RELAY
Model (manufacturer)
Relay type
QJ 600 45 Flasher
Electronic Flasher
Watt
130mA x4
Blinking frequency of direction indicators
80 ~160 cicli/min
STANDARD
OIL PRESSURE SENSOR
Model (manufacturer)/Calibration 0,05 ± 0,015MPa
QJ
QJ
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk

Benelli TRK 502 Specifications

General

Displacement	500 cc
Transmission	6-speed
Fuel Tank Capacity	20 liters
Seat Height	800 mm
Wet Weight	235 kg
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Clutch	Wet multi-plate
Frame	Steel trellis
Wheelbase	1505 mm
Ground Clearance	190 mm
Max Power	47.6 hp (35 kW) @ 8500 rpm
Max Torque	46 Nm @ 6000 rpm
Front Suspension	50 mm upside-down fork
Front Brake	Double floating discs, 320mm, 4-piston calipers
Rear Brake	Single 260 mm disc
Fuel System	Electronic Fuel Injection (EFI)
ABS	Dual-channel ABS
Front Tire	120/70 R17
Rear Tire	160/60 R17
Engine Type	Liquid-cooled, four-stroke, parallel twin cylinder, DOHC, 4 valves per cylinder