Why is the print faint on labels from my Brady Label Maker?
If the Brady Label Maker is printing with faint print on labels, the ribbon may not be advancing properly. With the ribbon installed, tension it by rotating the rewind spool (top spool) in a downward direction until all slack is removed. You might also try another ribbon cartridge.
What does 'Head over temp' mean on Brady BMP 61 Label Maker?
If your Brady Label Maker shows a "Head over temp" error, it means the print head is too hot. Allow the print head to cool down for about 10 minutes, then try your print job again.
What to do if the cutter does not cut on my Brady BMP 61 Label Maker?
If your Brady Label Maker cutter does not cut, it is possibly due to adhesive buildup. Clean the cutter blades using a moistened swab from the cleaning kit.
What does 'Error - "Out of Media"' mean on my Brady BMP 61?
If your Brady Label Maker displays the error 'Error - "Out of Media"', it means the label/media supply is exhausted, the labels/media are not installed correctly, the notch sensors are dirty, or the label/media memory device has counted down to zero. To solve this, replace the label/media roll or the roll holder, reinstall the labels/media, or clean the sensors. Press [CLEAR/ESC] key to clear the error.
How to resolve 'Out of Media' error on Brady BMP 61 Label Maker?
If your Brady Label Maker shows an "Out of Media" error, the label supply is exhausted. Replace the label supply roll.
What should I do if my Brady BMP 61 Label Maker shows an error during printing?
If you get an error while printing on your Brady Label Maker, it could be because the printer cover was opened during printing or feeding. Reinstall the ribbon and label supply, and then press the [CLEAR/ESC] key to clear the error.
How to fix 'Ribbon not optimized for label type' error on Brady Label Maker?
If your Brady Label Maker displays an error that the "Ribbon not optimized for label type", the ribbon material type and label material type that are installed in the printer may not be compatible. Replace the ribbon or label supply.
What is the acceptable range for terminal repeat value entered on Brady BMP 61?
The acceptable range for the terminal repeat value is between 0.2 inch and 40 inches.
Why am I getting poor print quality on my Brady BMP 61?
If you are experiencing poor print quality with your Brady Label Maker, the ribbon and label supply might be incompatible. Try changing the ribbon or label combination.
Why is my Brady BMP 61 Label Maker printing with poor quality?
If you're experiencing poor quality printing with your Brady Label Maker, make sure the correct ribbon for the label roll is loaded in the printer.
Overview of the BMP®61 label printer, its features, and initial setup instructions.
Details on power sources, battery handling, AC adapters, and connecting the printer to a PC or external devices.
Instructions for loading and unloading label media and ribbon cartridges.
Guide on how to attach the carrying strap and other accessories for printer use.
Steps for entering, editing, clearing, and managing text content on labels.
Customizing font size, attributes, expansion, condensation, and superscripts/subscripts.
How to insert predefined symbols and personal graphics into label designs.
Defining label areas, justification, rotation, frames, and adding barcode elements.
Using serialization for sequential numbering and the List function for variable data.
Saving, opening, deleting, and organizing label files and folders.
Procedures for printing labels, using print preview, and managing print jobs.
Introduction to the various label types supported by the BMP®61 printer.
Detailed guides for using General, WireMarker, Flags, Terminal Block, Vial, and other label types.
Instructions for cleaning the display screen and internal printer components.
Diagnosing and resolving problems related to hardware, power, print quality, and media.
Supported keyboard layouts and language options for different regions.
Categorized list and usage of symbols for various label applications.
General| Print Technology | Thermal Transfer |
|---|---|
| Resolution | 300 dpi |
| Display | Color LCD |
| Cutter | Automatic |
| Keyboard Type | QWERTY |
| Battery | Rechargeable Li-ION battery |
| Max Print Width | 1.5 inches |
| Label Width Range | 0.25 to 1.5 inches |
| Print Speed (mm/s) | 33.8 |
| Connectivity | USB, Wi-Fi |
| Power Source | Battery or AC adapter |
| Supported Materials | Polyester, vinyl, nylon, and more |
| Memory | 256 MB |
| Material Compatibility | Continuous Tapes, Die-Cut Labels |
To Next Page
