3-101
Confidential
9.36 T1 paper feed sensor PCB ASSY /
T1 paper feed actuator / T1 paper feed actuator spring
(1) Release the T1 paper feed sensor harness from the securing fixtures.
(2) Remove the taptite bind B M3x10 screw, and remove the T1 paper feed actuator holder
ASSY.
(3) Remove the tray lock R.
Fig. 3-91
Harness routing: Refer to
“8. Bottom side of the machine (High-voltage power supply PCB ASSY)”
.
T1 paper feed actuator holder ASSY
Taptite bind B M3x10
T1 paper feed sensor harness
Tray lock R
To Next Page
Loading...
