Brother HL-5590DN Service Manual

2-29
Confidential
3.2.2 Touch panel models
Error message
Description
Error
codes
Refer
to:
First line Second line
Cartridge Error Put the Toner
Cartridge back in.
The new toner sensor could not
detect the new toner cartridge
correctly.
4F01 2-50
Cooling Down Wait for a while. The side thermistor of the fuser
unit or internal temperature sensor
detected a temperature higher
than the specified value.
6801 2-53
Cover is Open
- The front cover sensor detected
that the front cover was open.
6001 2-51
The eject sensor detected that the
fuser cover was open.
6004 2-52
MX back cover sensor detected
the open cover when the MX was
selected as the output tray (before
registering printing data to
engine).
8808 2-74
MX back cover sensor detected
the open cover when the MX was
selected as the output tray (after
registering printing data to
engine).
8809 2-74
Drum !
- Detected discharge that may be
attributable to dirty corona wire on
the drum unit.
6A00 2-54
Firmware Update You must update the
firmware.
Firmware version of the main PCB
is older than that of the TT, MX
and LT.
9400 2-79
Ignore Data Press Stop[x]. Detected undecodable data during
printing. Received undecodable
PS data.
--- 4.11.1
Ignore Data
Jam 2-sided
- The registration front sensor does
not detect paper pass within the
specified time after the first side
was printed in duplex printing
mode.
7800 2-66
Jam Inside
- The eject sensor does not detect
paper pass after the registration
rear sensor detected the paper
pass.
7000 2-55

Brother HL-5590DN Specifications

General

Brand	Brother
Model	HL-5590DN
Category	Printer
Language	English