Brother HL-5590DN

3-141
Confidential
(3) Remove the gear 30 MX and the two gears 66L/38 MX from the MX motor drive ASSY.
(4) Remove the three screw bind M3x4 screws, and remove the MX motor from the MX
motor drive ASSY.
Fig. 3-133
Fig. 3-134
Assembling Note:
• Fold the MX motor flat cable at the positions shown in the figure below.
Gear 66L/38 MX
Gear 30 MX
Screw bind M3x4
MX motor drive ASSY
MX motor
Mountain fold
Valley fold
47±1
26±1
1±1
Reinforcing plate
45°45°