Brother HL-5590DN

2-27
Confidential
Size Error Specify the correct
paper size for Tray 1.
When printing from paper tray 1, a
paper size not supported for paper
tray 1 was specified from the
driver.
9702 2-80
Specify the correct
paper size for Tray 2.
When printing from paper tray 2, a
paper size not supported for paper
tray 2 was specified from the
driver.
9703 2-80
Specify the correct
paper size for Tray 3.
When printing from paper tray 3, a
paper size not supported for paper
tray 3 was specified from the
driver.
9704 2-80
Specify the correct
paper size for Tray 4.
When printing from paper tray 4, a
paper size not supported for paper
tray 4 was specified from the
driver.
9705 2-80
Size Error DX Press Cancel. Specify
the correct paper and
load the same size
paper as the Printer
driver setting.
A tray set to duplex printing-
incompatible size was specified in
duplex printing. 9701 2-80
Specify the correct
paper and press Go.
The registration rear sensor
detected that the paper fed was
smaller or larger than the specified
size in duplex printing mode.
8A01 2-75
Size Mismatch Load #S paper in #T
and press Go.
When printing from the MP tray,
the size of paper set in the MP tray
does not match the size specified
by the driver.
9001 2-76
When printing from the paper tray
1, the size of paper set in the
paper tray 1 does not match the
size specified by the driver.
9002 2-76
When printing from the paper tray
2, the size of paper set in the
paper tray 2 does not match the
size specified by the driver.
9003 2-76
When printing from the paper tray
3, the size of paper set in the
paper tray 3 does not match the
size specified by the driver.
9004 2-76
When printing from the paper tray
4, the size of paper set in the
paper tray 4 does not match the
size specified by the driver.
9005 2-76
Toner Low
- Dot counter or develop roller
counter of the toner is reaching
the upper limit.
4B01 2-50
First line Scroll Description
Error
codes
Refer
to: