2-20
Confidential
8E02 Upon receiving a fax or printing a
list or report, the size of the
paper loaded in the paper tray
was detected to be shorter than
Letter by 10 mm or more.
2-64
8E03 When a received fax, list, or
report was printed on multiple
pages, the size of the paper
loaded in the paper tray was
detected to be shorter than the
size selected in the machine by 2
mm or more.
2-64
8F01 ---
8F02 ---
8F03 ---
9001 ---
9002 The size of paper loaded in the
paper tray and the one specified
from the driver are not same
when paper is fed from the paper
tray.
2-64
9003 ---
9004 ---
9005 ---
9102 ---
9103 ---
9104 ---
9105 ---
9200 ---
9301 ---
9302 For printing by feeding paper
from the paper tray, the paper
feed sensor detected that no
paper was in the paper tray.
2-65
9303 ---
9304 ---
9305 ---
9306 ---
Error
codes
Problem
Refer
to:
9307 Upon receiving a fax or printing a
list or report, the machine
detected that paper tray empty of
paper.
2-65
9401 ---
9402 ---
9403 ---
9404 ---
9501 ---
9502 ---
9503 ---
9504 ---
9505 ---
9601 ---
9608 ---
9701 For 2-sided printing, the tray
whose paper size was not
supported by 2-sided printing
was selected.
2-66
9702 ---
9703 ---
9704 ---
9705 ---
9801 Error occurred with the value
measured during color density
adjustment performed from the
control panel.
2-66
9802 Dot counter or develop roller
counter of color toner has
reached the upper limit during
color density adjustment
performed from the control panel.
2-67
9803 Density patch measurement
ended unsuccessfully during
color density adjustment
performed from the control panel.
2-67
Error
codes
Problem
Refer
to: