Burford 2000 - Operator Test Questions

Test Procedures 173
 Operator Test
1. Brush settings remain the same for all varieties.
a) True
b) False
2. The belt speed should pull the package how far in front of the flight?
a) 1-2 feet
b) 1-2 inches
c) 9.43 inch
d) 0 inches
3. To Home the Tyer which button should be pressed and held?
a) The Home button
b) The Thread button
c) The Run button
d) The Stop button
4. Which side of the spool should the ribbon feed from?
a) Top
b) Bottom
c) Doesn’t matter
5. What happens when excessive tension is applied to the spool system?
a) Ribbon Drop
b) Off-center tie
c) Too much ribbon used
d) Nothing whatsoever