174
Chapter 9
Mechanics Test
1. What is the main cause of two bags being tied together?
a) Upper and/or lower bag-stop worn out
b) Belt Speed set to fast
c) Bag hanging on twister hook
d) All of the above
2. What are the signs of worn or wearing out gathering belts?
a) Plenty of red material
b) The belts don’t really matter
c) Slick or scalloping with black showing through the red
d) Visible writing on the belts
3. When you have an error code of 111 through 146 what does the middle
number represent?
a) Name of motor involved
b) Ribbon color
c) Placement of Prox
d) Not a thing
4. When dealing with a motor error code what are the four main check points?
a) Ribbon, Belts, Encoder, Motor
b) Belt speed, Ribbon Tension, Brush Settings, Cam Followers
c) Fuse, Prox, Motor, Encoder
d) Boards, Wiring, Prox, Drive Belt
To Next Page
Loading...
