Test Procedures 175
5. Adjusting the holder/shear to tightly could result in a broken pivot bolt in the
holder/shear or possible motor/encoder damage.
a) True
b) False
6. When adjusting the holder/shear you should be able to rotate the cam on the
motor 360° by hand with no slack in the holder/shear.
a) True
b) False
7. DIP switch number one effects what function of the tyer?
a) Ribbon Drop
b) Belt speed
c) Tie Cycle Abort
d) Left/Right hand select
8. What is the proper gap between the needle and bag switch arm?
a) As wide as possible
b) 2 inches
c) .25 inches
d) As close as possible
9. What is the proper gap between the holder/shear and twister hook?
a) 1 inch
b) 5/32
c) 1/2 inch
d) 3/32 inch
To Next Page
Loading...
