Ink T anks
8. Before opening the pouch, shake the Ink T ank gently seven or eight times. Agitate the ink in the
Ink T ank by slowly turning the Ink T ank upside-down and right side up several times.
Note
• If you do not shake the Ink T ank , the ink may sediment, which may af fect printing quality .
9. Open the pouch and remove the Ink T ank .
Note
• Never touch the ink holes or metal contacts. This may cause stains, damage the Ink T ank , and
af fect printing quality .
• A void dropping the Ink T ank after removing it from the pouch. Otherwise, ink may leak and cause
stains.
• Do not remove and shake an Ink T ank that has already been installed in the printer . Ink may leak out.
10. Press the OK button and insert the Ink T ank into the holder facing as shown in the gure, with
the ink holes down.
Important
• Ink T ank cannot be loaded in the holder if the color or orientation is wrong.
If the Ink T ank does not t in the holder , do not force it into the holder . Make sure the color of the
Ink T ank Lock Lever matches the color of the Ink T ank , and check the orientation of the Ink T ank
before reloading it.
Maintenance 51 1