CAPINTEC, INC. CAPTUS
®
600
Figure 1-5
Located on the connector guard on the back panel of the CAPTUS
®
600
Readout Unit is a
label (
Figure 1-6), with the caution statement pertaining to safety of the operator. This
statement, DO NOT REMOVE CONNECTOR GUARD, is necessary because of the
presence of high voltage on the connectors and on the inside of the Instrument.
Figure 1-6
This “Consult Accompanying Document” symbol (
Figure 1-7) refers to the CHAPTER 3:
GENERAL OPERATION OVERVIEW, for instructions on how to use the Probe Offset, Well
Offset and Contrast adjustments on the CAPTUS
®
600 Readout Unit.
Figure 1-7
This “Consult Accompanying Document” symbol (
Figure 1-8) refers to the Chapter 3:
GENERAL OPERATION OVERVIEW chapter in this manual, for instructions on how to use
Probe and Well High Voltage adjustments on the CAPTUS
®
600 Readout Unit.
Figure 1-8
1-4 SAFETY November 07
To Next Page
Loading...
