CAPINTEC, INC. CAPTUS
®
600
ACTIVITY WILL BE IN Ci
Ci/Bq
OK
Figure 5-8
The F1 [Ci/Bq] key is a toggle switch. When this key is pressed, the screen changes to
Figure 5-9.
ACTIVITY WILL BE IN Bq
Ci/Bq
OK
Figure 5-9
When the screen displays the correct units of measure, press the F4 [OK] key. The screen
returns to the Setup menu (
Figure 5-7).
The entire CAPTUS
®
600 will run in the selected units. Any data or measurements already
stored in the unit will be converted to the new unit. This includes Wipe Test Trigger Levels.
5-6 SYSTEM INITIALIZATION November 07
To Next Page
Loading...
