CAPINTEC, INC. CRC
®
-25R
The time/date entry format is hhmm/DD/MM/YY where:
• hh= hours (24 hour format) (1 or 2 digit)
• mm = minutes (2 digit)
• DD = day (2 digit)
• MM = month (2 digit)
• YY = year (2 digit)
The minimum input required is the time (hhmm). That is, if the future time is sometime later in
the same day, then all that needs to be input is the time. For example:
If the current time is 12:00 and the desired future time is 16:00 today;
• input 1600 and
• press ENTER. Figure 10-7 Future Activity – Same Day will appear
If the future time is sometime the next day, then all that needs to be input is the time (hhmm)
and day (DD). For example:
If today is July 30 and the desired future time is 9:00 tomorrow;
• input 900 (for the time),
• press the DOWN ARROW (),
• input 31 (for the day) and
• press ENTER. Figure 10-8 Future Activity – Different Day will appear.
If the future time is sometime the day after tomorrow, then the time (hhmm), day (DD) and
month (MM) will need to be input. For example:
If today is July 30 and the desired future time is 9:00 the day after tomorrow;
• input 900 (for the time),
• press the DOWN ARROW (),
• input 01 (for the day),
• press the DOWN ARROW (),
• input 08 (for the month) and
• press ENTER.
If only the time was changed, the new time will be shown as in Figure 10-7 Future Activity –
Same Day.
March 15 MEASUREMENT PROCEDURES 10 - 7
To Next Page
Loading...