CAPINTEC, INC CRC
®
-25R
Key Usage
General usage of keys is briefly described. Specific key usage will be given in the
appropriate sections.
NUCLIDE Keys
Pressing one of these keys selects that nuclide.
F18, Ga67, In111, Tc99m, I 123, I 131, Xe133, Tl201
USER Keys
Any nuclide in memory may be assigned to any of the USER Keys.
When a key is assigned, it acts just like a Nuclide Key.
U1, U2, U3, U4, U5
SOURCES Key
Pressing this key will toggle through the entered Test Sources for the chamber.
NUCL Key
Pressing this key allows the user to select any nuclide in memory (including nuclides
added by the user).
The nuclide is chosen using the number/ letter keys.
CAL# Key
CAL#
Pressing this key in allows the user to input a Calibration Number to be used for the
current measurement.
TIME Key
After pressing this key, a time and date is input. The activity at the input time of the
source being measured is displayed under the current activity along with the input
time and date.
TEST Key
Pressing this key will display the Test Menu.
BKG Key
Pressing this key steps the user through the Background Measurement. The
background will be measured and stored.
3 - 2 GENERAL OPERATING INSTRUCTIONS July 07
To Next Page
Loading...
Need help?
General