CAPINTEC, INC CRC
®
-25R
HOME Key
Pressing this key will return the user to the Measurement Screen.
If this key is pressed before ending the task being performed, the task will be
terminated without being finished (e.g. entered data will not be stored and previous
values are maintained).
MENU Key
Pressing this key brings up the Main Menu.
This key is also used to return to the previous menu screen.
Ci / Bq Key
Pressing this key toggles the measurement between Curies and Becquerels.
It is only active if USER SELECTABLE has been chosen for Ci/Bq.
CE Key
This is the Clear Entry key and is used to erase the last character when entering
data.
ENTER (PRINT) Key
ENTER
This key is used to accept entered data.
PRINT
This key is used to print a record of the measurement.
NUMBER / LETTER (Alphanumeric) Keys
The keys with Numbers and Letters on them are used to enter data. The decimal
point is the UP ARROW (Ñ) key. The DOWN ARROW (Ô) key is the SPC (Space).
ARROW Keys (Ñ and Ô)
During a measurement, the arrows are used to change the precision of the displayed
measurement for low activity.
When a multi-field entry is being made (e.g. date, time, activity, half-life) the arrows
are used to move to the next field or to change the value of the unit.
July 07 GENERAL OPERATING INSTRUCTIONS 3 - 3
To Next Page
Loading...
Need help?
General