Capintec CRC-25R - WARNING AND CAUTION LABELS

CAPINTEC, INC. CRC
®
-25R
WARNING AND CAUTION LABELS
Located on the back of the Readout Unit is a label, (Figure 1-1), providing the system power
requirements and the replacement fuse values for power line voltages.
CAUTION: Please reference CHAPTER 15: CLEANING AND MAINTENANCE,
SECTION: FUSE SERVICING for instructions on how to change the
fuses of the CRC
®
-25R.
CAUTION: A fire hazard may exist if the wrong size of fuse is installed.
Figure 1-1
Located on the bottom of the Chamber are 2 labels.
The first label, (Figure 1-2), contains statements denoting not to remove the cover because
there are no adjustments that the user can perfo
rm in the Chamber.
Figure 1-2
The second label (Figure 1-3) pertains to the electrical safety of the Chamber. It is necessary
because of t
he high voltage present
(approximately 180 Volts DC) on the PC board installed
in the chamber. A screwdriver is necessary to remove the cover.
HAUTE TENSION
MISE EN GARDE
Figure 1-3
1 - 2 SAFETY October 13