Capintec CRC-25R - CHAPTER 6 CHAMBER INITIALIZATION; USER KEY ASSIGNMENT

CAPINTEC, INC. CRC
®
-25R
CHAPTER 6
CHAMBER INITIALIZATION
GENERAL
This section describes initialization and parameter setup for the Chamber.
All of these functions are accessed via the Main Menu.
USER KEY ASSIGNMENT
The USER Keys (U1, U2, U3, U4, U5) are a quick way to select a nuclide. A nuclide may be
assigned to each key.
To assign keys, press MENU from the Measurement Screen.
Select SETUP. The Setup Menu appears.
Select OTHER. Input the password (last 3 digits of the Readout serial number) and press
ENTER. Figure 6-1 Other Menu appears.
1. User Keys
2. Sources
3. Moly Setup
4. Nuclides
5. Linearity
6. Remote / PC
Figure 6-1 Other Menu
From the Other Menu, select USER KEYS.
March 15 CHAMBER INITIALIZATION 6 - 1