Capintec CRC-25R - Regulatory Listings; Emc; Electrical; ETL Listed

CAPINTEC, INC. CRC
®
-25R
Regulatory Listings
The CRC
®
-25R has been independently tested and is manufactured in compliance with the
following Standards:
EMC
• IEC 61326: Electrical equipment for measurement control and laboratory use
– EMC requirements
Electrical
• EN 61010-1: Safety requirements for electrical equipment for measurement,
control, and laboratory use Part 1: general requirements
ETL Listed
• CAN/CSA C22.2 No. 61010-1:2004, 2
nd
Edition: Safety Requirements for
Electrical Equipment for Measurement, Control and Laboratory Use – Part 1:
General Requirements
• CAN/CSA C22.2 No. 61010-2-101:04, 1
st
Edition: Safety Requirements for
Electrical Equipment for Measurement, Control and Laboratory Use –
Particular requirements for in vitro diagnostic (IVD) medical equipment
• ANSI/UL 61010-1:2004, 2
nd
Edition: Safety Requirements for Electrical
Equipment for Measurement, Control and Laboratory Use – Part 1: General
Requirements
March 15 FUNCTIONAL & TECHNICAL DESCRIPTION 2 - 7