Capintec CRC-25R User Manual

CAPINTEC, INC. CRC
®
-25R
Tc99m 12:00
10.04mCi
6.33mCi 16:00
Figure 10-7 Future Activity – Same Day
If the day was changed, the new time and date will be shown as in Figure 10-8 Future
Activity – Different Day.
Tc99m 12:00
10.04mCi
889.µCi 09:00
Aug 03 2005
Figure 10-8 Future Activity – Different Day
To input a new time, press the TIME key again. Figure 10-6 Time / Date Input Screen will re-
appear.
To exit Activity at a Different Time, press the TIME key. Figure 10-1 Measurement Screen
will re-appear.
USER ID
Note: A printer must be attached to the system in order to use the User ID feature.
A two-digit identification number (01-99) may be assigned to each user of the CRC
®
-25R.
This ID will be included on the printed record after the label “BY”.
When the ID is input, the digits will not be displayed on the screen. The CE key may be used
to correct an entry.
If using an ID number, it must be input before pressing ENTER to print a record.
For example, if the user’s ID is 12:
• at the Measurement screen, input 12 and
• press the ENTER key.
The printed record will list “12” after the label “BY”.
10 - 8 MEASUREMENT PROCEDURES March 15

Capintec CRC-25R Specifications

General

Brand	Capintec
Model	CRC-25R
Category	Laboratory Equipment
Language	English