CAPINTEC, INC. CRC
®
-25R
Liners, Dippers, Optional Dipper and Holders
Figure 4-3 Liner and Dippers
Figure 4-4 Holders
Note: The supplied Chamber Liner (7300-2004) and Dipper (7300-2005) are only to
be used for the measurement of Test sources (Standard Sources). For all
other source measurements, use the appropriate source holder for the source
type being measured in order to obtain a correct reading. If additional
information is needed, contact Capintec, Inc. for further assistance.
4 - 4 SYSTEM SETUP March 15
To Next Page
Loading...
Need help?
General